AdjProg Epson L3250 Resetter - Free Download

Advertisement

Solution for Epson L3250 Red Light Blinking

If the red light on your Epson L3250 printer starts flashing, it could indicate several problems, including low ink levels or an issue with the ink cartridge. If you've replaced the cartridge and the power turns off after three minutes, it's possible that the cartridge is improperly installed. Simply remove and reinstall it to resolve the issue. If paper is stuck in the printer, this could also cause the red light to flash.

"Service Required" Error on Epson L3250

At times, Epson printers may display a "service required" error, preventing users from printing further. This error is often indicated by a red light on the printer and is typically caused by the ink cartridges sensors signaling that they need to be refilled or replaced. To resolve this issue, follow the steps in the Epson reset software.

Resetting the Epson L3250 Printer

To reset your Epson L3250 printer, you can use the Epson Resetter software, which is available as a free download. Follow these steps:

1. Extract the WinRar Epson Resetter software.
2. Run the adjustment program utility and select the Epson L3250 printer.
3. Choose the waste ink pad counter and click OK.
4. Check the main pad counter box and press the "Check" button.
5. Select the "Initialization" button to reset the waste ink pad counter.
6. Turn off the printer and press OK.
7. After a few minutes, turn on the printer.

Epson L3250 Resetter Free Download

The Epson L3250 Resetter software is a free download for Windows 7, 8, 8.1, 10, and 11, and works with both 32-bit and 64-bit systems. This software allows you to reset your Epson L3250 printer to a single ink tank system. Simply download the software from an online or offline source and follow the steps outlined above.

Download Epson L3250 Resetter

Download File

File Type : RAR

Size : 4.165 kb

Unlock Key / Pass RAR : avastudio