Epson L1210 Resetter Adjustment Program 100% Work

Advertisement

The Epson L1210 Resetter is a must-have tool for all Epson L1210 printer users. It is used to resolve various issues with the printer, including resetting the printer, configuring it, performing maintenance tasks like cleaning, power cleaning, and nozzle checking, and aligning the print results. The most common use of this resetter is to reset the printer, especially the Epson L1210.

If your printer suddenly stops working while printing a document, it can be frustrating. There can be several reasons for this, but one of the first things to do is to reset the printer. Before resetting the printer, it's important to understand that not all Epson printer errors can be resolved using a resetter. When there is an error, the printer's ink indicator light and paper indicator light will blink simultaneously. Some notifications that indicate it's time to reset the ink levels include "It's nearly time to reset the ink levels," "It's time to reset the ink levels," "service required," "Ink pad is at the end of its service life," and "Ink waste is full."

There are two ways to reset the Epson L1210 printer: manual reset and resetting using a specialized tool, the Epson L1210 resetter. The manual reset method involves pressing buttons on the printer, while the second method involves using the resetter software.

Before downloading the resetter, make sure that you have the correct printer type (Epson L1210, L3120, etc.). Also, make sure that you understand and agree to the software's terms and conditions. To begin the reset process, first download the resetter software.

How to Manually Reset Epson L1210 Printer:

Resetting an Epson L1210 printer manually does not require any software. Instead, a specific combination of buttons needs to be used to reset the printer successfully. Here are a few things to keep in mind before attempting to manually reset the printer:

• This reset method is only applicable for resetting the ink levels, which is indicated by a flashing light on the printer.
• This method is only suitable for printers that display notifications such as "It is nearly time to reset the ink levels" or "It is time to reset the ink levels" on the computer.

This method will not work for general errors or when the waste ink pad is full (service required).

Here are the steps to manually reset the Epson L1210 printer:

1. Unplug the power cable from the printer for 3-5 minutes.
2. Plug the power cable back into the printer.
3. Turn on the printer by pressing the on/off button.
4. Once the printer is turned on, press and hold the Resume button (next to the on/off button) for about 5 seconds, then release.
5. If the first step did not work, try the following technique: Press the Resume button for 5 seconds, release, then press for 3 seconds, release, and finally press for 1 second and release.
6. If the reset was successful, the printer should stop flashing. If the light continues to flash, repeat the previous steps.
7. Test the printer to ensure that it is working properly again.

How to Reset the Epson L1210 Printer with Adj Prog:

1. Download the Epson Resetter software and extract it using WinRAR. (Unlock Key : avastudio )
2. Open the adjustment program utility file and choose your Epson printer model.
3. After selecting your printer, click OK.
4. In the Maintenance section, select the Waste Ink Pad Counter option and press OK.
5. Ensure that the Main Pad Counter box is checked.
6. Press the Check button.
7. Select the Initialization button to reset the waste ink pad counter.
8. Turn off your printer and then press OK.
9. Turn your printer back on.
10. The reset is complete, and you can now enjoy using your printer.