AVA Studio ID

lisensi

Iklan

AVAStudio_ID
03 February 2023, 19:51 WITA (GMT+8)
Last Updated 2023-02-03T11:51:29Z

How to remove the fuser on HP Printers

Advertisement
Turn off the printer and unplug the power cable. If the printer has been in use, the fuser may be hot. For safety, wait for 30 minutes for the fuser to cool down before continuing.
  • Remove the duplexer from the rear of the printer if it has been installed.
How to remove the fuser on HP Printers

  • Next, lower the cover of the rear output tray as illustrated.
How to remove the fuser on HP Printers

  • Bend the arms on the plastic output tray slightly to remove one side at a time. Place the cover of the output bin aside.
How to remove the fuser on HP Printers

  • While holding both sides of the fuser, push the blue levers upwards and extract the fuser directly.
How to remove the fuser on HP Printers
  • Insert the new fuser, aligning the left side first, and press it firmly into place. Ensure that both blue levers click into position, which will prevent premature wear on the fuser and its driving gears. Finally, reinstall the plastic output tray at the rear.

No comments:

Post a Comment

Selamat Datang

X
X