How to Reset Canon Pixma MX850 error Ink Absorber Full [5B00] [5B01]

Advertisement

How to Reset Canon Pixma MX850 error Ink Absorber Full [5B00] [5B01]

for resetting the Canon Pixma MX850 error for an ink absorber full [5B00] [5B01]:

Put the printer in Service Mode:

1. Turn off the printer
2. Press and hold the Stop/Reset button
3. Press and hold the ON/OFF button while holding the Stop/Reset button
4. Release the Stop/Reset button, but not the ON/OFF button
5. While holding the ON/OFF button, press the Stop/Reset button 2 times and then release both buttons.

Reset the error:

1. Press the Stop/Reset button 4 times to reset the ink absorber counter in the EEPROM
2. Load A4 or Letter paper and press the ON/OFF button to execute the reset.

Set the destination:

1. Press the Stop/Reset button 5 times to enter Destination settings mode
2. Press the Stop/Reset button the number of times corresponding to the desired destination, as indicated in the table
3. Press the ON/OFF button to execute the destination change.

Initialize the EEPROM:

1. Press the Stop/Reset button 3 times to enter the EEPROM initialization
2. Press the ON/OFF button to execute the initialization.

The steps should be followed carefully, otherwise, it may result in damaging the printer. If the problem persists, please contact the support center or service center for ink absorber replacement.