How to reset the ink absorber´s counter for Canon Pixma iP4000

Advertisement

How to reset the ink absorber´s counter for Canon Pixma iP4000

To reset the ink absorber counter for Canon Pixma iP4000:

1. Turn off the printer.
2. Hold down the "Resume" button and press the "Power" button to turn on the printer.
3. Release the "Resume" button and press it again 4 times.
4. Release both buttons, the printer should be in service mode.
5. Press the "Resume" button 2 times to select the "Maintenance" menu.
6. Press the "Power" button to confirm the selection.
7. Use the "Resume" button to navigate to "Absorber Counter" and press the "Power" button to confirm the selection.
8. Use the "Resume" button to navigate to "Counter" and press the "Power" button to reset the ink absorber counter.
9. Turn off the printer and then turn it on again to exit the service mode.

Note: This procedure may vary depending on the firmware version of your printer.