How to Reset Canon Pixma MP830 (Waste Ink Tank/Pad is Full)

Advertisement

How to Reset Canon Pixma MP830  (Waste Ink Tank/Pad is Full)

Reset Printer Canon Pixma MP830 (Waste Ink Tank/Pad is Full)

Permasalahannya

• Waste ink tank full,
• Waste ink pad full,
• The ink absorber is almost full,
• Error 5B00,
• Error P07,
• Blink 7 times,
• Blink 8 times,
• The ink absorber becomes almost full,/
• Error E08,
• Error E07,
• Error 6C10,
• Error 5B02 

Cara Mereset Printer canon Pixma MP830 ikuti langkah-langkah dibawah ini..

Step 1: Entering Service Mode

1. Turn off the printer.
2. Press and hold the Stop/Reset button.
3. Press and hold the Power button.
4. Release the Stop/Reset button (while still holding the Power button).
5. Press and release the Stop/Reset button once.
6. Press and hold the Stop/Reset button.
7. Release both the Power and Stop/Reset buttons at the same time.

Note --- After both buttons are released, the indicator light will flash green for a while and then the green light will stay on constantly and the printer's LCD screen will display "0". If after following steps 1-7 the green light does not stay on but the printer continues to display an error state, it means you made a mistake in steps 1-7 when performing these steps. Turn off the printer and repeat steps 1 to 7.

Step 2: Resetting Canon Pixma MP830 Printer Manually/Using General Tool/Service Tool

Manually Resetting Canon Pixma MP830 Printer

1. Press the Resume button 4 times (each time the Resume button is pressed, the power indicator changes color).
2. Press the Power button once to confirm the selected action (reset the absorber counter).
3. Press the Power button twice to turn off the printer.
4. Turn on the printer and it is now ready for use.

Another Command for Step 8:

• Press the Resume button: 1 time – Orange – Service test print (load paper before doing it)
• Press the Resume button: 2 times – Green – EEPROM information print (load paper before doing it)
• Press the Resume button: 3 times – Orange – EEPROM initialization
• Press the Resume button: 4 times – Green – Waste ink counter setting
• Press the Resume button: 5 times – Orange – Destination setting (then Press Power, Press Resume 3 times)
• Press the Resume button: 6 times – Green – Print head deep cleaning
• Press the Resume button: 11-13 times – Orange, Green, Orange – Return to menu selection
• Press the Resume button: 14 times – Green – Left margin correction

Demikian artikel tentang Reset Printer Canon Pixma MP830 (Waste ink absorber is almost full, Waste ink tank full) semoga bermanfaat untuk kita semua, Jika ada keluhan lain silahkan coret di kolom komentar