How to Reset Printer Canon Pixma MP228 (Waste Ink Tank/Pad is Full)

Advertisement

How to Reset Printer Canon Pixma MP228 (Waste Ink Tank/Pad is Full)

Permasalahannya

• Waste ink tank full,
• Waste ink pad full,
• The ink absorber is almost full,
• Error 5B00,
• Error P07,
• Blink 7 times,
• Blink 8 times,
• The ink absorber becomes almost full,/
• Error E08,
• Error E07,
• Error 6C10,
• Error 5B02 

Cara Mereset Printer canon Pixma MP228, ikuti langkah-langkah dibawah ini..

Step 1: Enter Service Mode

1. Turn off the printer.
2. Press and hold the Stop/Reset button.
3. Press and hold the On/Off button.
4. Release the Stop/Reset button (the On/Off button is still being held).
5. Press and release the Stop/Reset button once.
6. Press and hold the Stop/Reset button.
7. Release both the On/Off and Stop/Reset buttons at the same time.

Note --- After releasing the two buttons, the indicator will flash green for a while and then the green light will remain lit and the LCD printer will display "0". If after following steps 1-7 the green light does not remain on but the printer continues to display an error status, it means you made a mistake in steps 1-7 while performing the steps. Turn off the printer and repeat steps 1-7 again.

Step 2: Reset Canon Pixma MP228 Printer Manually/With General Tool/Service Tool

1. Press the Stop/Reset button 4 times (each time the Stop/Reset button is pressed, the power indicator changes color).
2. Press the On/Off button 1 time to confirm the selected action (reset the absorber counter).
3. Press the On/Off button 2 times to turn off the printer.
4. Turn on the printer
5. The printer is now ready to use.

Other commands for Step 1:

• Press Stop/Reset button: 1 Time - Orange - Service test print (Insert Paper into Printer)
• Press Stop/Reset button: 2 Times - Green - EEPROM information print (Insert Paper into Printer)
• Press Stop/Reset button: 3 Times - Orange - EEPROM initialization
• Press Stop/Reset button: 4 Times - Green - Waste ink counter setting
• Press Stop/Reset button: 5 Times - Orange - Destination setting (Then press the Power button and press the Stop/Reset button 3 times)
• Press Stop/Reset button: 6 Times - Green - Print head deep cleaning
• Press Stop/Reset button: 11-13 Times - Orange, Green, Orange - Return to menu selection
• Press Stop/Reset button: 14 Times - Green - Left margin correction

Demikian artikel tentang Reset Printer Canon Pixma MP228 (Waste ink absorber is almost full, Waste ink tank full) semoga bermanfaat untuk kita semua, Jika ada keluhan lain silahkan coret di kolom komentar