How to Reset Canon Pixma MP220 (Waste Ink Tank/Pad is Full)

Advertisement

How to Reset Canon Pixma MP220  (Waste Ink Tank/Pad is Full)

Reset Printer Canon Pixma MP220 (Waste Ink Tank/Pad is Full)

Permasalahannya

1. Waste ink tank full,
2. Waste ink pad full,
3. The ink absorber is almost full,
4. Error 5B00,
5. Error P07,
6. Blink 7 times,
7. Blink 8 times,
8. The ink absorber becomes almost full,/
9. Error E08,
10. Error E07,
11. Error 6C10,
12. Error 5B02

Cara Mereset Printer canon Pixma MP220, ikuti langkah-langkah dibawah ini..

Step 1: Enter Service Mode

1. Turn off the printer.
2. Press and hold the Stop/Reset button.
3. Press and hold the Power On/Off button.
4. Release the Stop/Reset button (while still holding the Power On/Off button).
5. Press and release the Stop/Reset button once.
6. Press and hold the Stop/Reset button.
7. Release both the Power On/Off and Stop/Reset buttons simultaneously.

Note---After both buttons are released, the green indicator will flash for a while and then the green light will be constantly lit and the printer's LCD will display "0". If after following steps 1-7 the green light is not continuously lit but the printer continues to display an error state, it means you made a mistake in steps 1-7 when performing the steps. Turn off the printer and repeat steps 1-7 again.

Step 2: Reset Canon Pixma MP220 Printer Manually/Using General Tool/Service Tool

1. Press the Stop/Reset button 4 times (each time the Stop/Reset button is pressed, the power indicator changes color).
2. Press the On/Off button once to confirm the selected action (reset the absorber counter).
3. Press the On/Off button 2 times to turn off the printer.
4. Turn on the printer
5. Now the printer is ready to use.

Additional commands for point 1:

• Press Stop/Reset button: 1 time – Orange – Service test print (Insert paper into printer)
• Press Stop/Reset button: 2 times – Green – EEPROM information print (Insert paper into printer)
• Press Stop/Reset button: 3 times – Orange – EEPROM initialization
• Press Stop/Reset button: 4 times – Green – Waste ink counter setting
• Press Stop/Reset button: 5 times – Orange – Destination setting (Then press the Power button, and press the Stop/Reset button 3 times)
• Press Stop/Reset button: 6 times – Green – Print head deep cleaning
• Press Stop/Reset button: 11-13 times – Orange, Green, Orange – Return to menu selection
• Press Stop/Reset button: 14 times – Green – Left margin correction

Demikian artikel tentang Reset Printer Canon Pixma MP220 (Waste ink absorber is almost full, Waste ink tank full) semoga bermanfaat untuk kita semua, Jika ada keluhan lain silahkan coret di kolom komentar