How to Reset Canon Pixma MG3500 (Waste Ink Tank/Pad is Full)

Advertisement

 

How Reset Canon Pixma MG3500  (Waste Ink Tank/Pad is Full)

Reset Printer Canon Pixma MG3500 (Waste Ink Tank/Pad is Full)

Permasalahannya

• Waste ink tank full,
• Waste ink pad full,
• The ink absorber is almost full,
• Error 5B00,
• Error P07,
• Blink 7 times,
• Blink 8 times,
• The ink absorber becomes almost full,/
• Error E08,
• Error E07,
• Error 6C10,
• Error 5B02 

Cara Mereset Printer canon Pixma MG3500 ikuti langkah-langkah dibawah ini..

Step 1: Enter Service Mode

1. Turn off the printer.
2. Press and hold the Stop/Reset button.
3. Press and hold the Power/On button.
4. Release the Stop/Reset button (the Power/On button is still pressed).
5. Press and release the Stop/Reset button 4 times.
6. Press and hold the Stop/Reset button.
7. Release the Power/On and Stop/Reset buttons together.

Note: After both buttons are released, the Power/On indicator will blink green for a while and then will light up green constantly.

If after following steps 1-7 the green light is not constant but the printer continues to show an error, it means you made a mistake in steps 1-7. Turn off the printer and repeat step 1.

Langkah 2: Reset Printer Canon Pixma MG3500 dengan manual/aplikasi General tool/service tool

Reset Printer Canon Pixma MG3500 with Resetter Tool

• Reset Canon Pixma MG3500 with Resetter Canon ST v3400 ==> Reset here..
• Reset Canon Pixma MG3500 with Resetter Canon ST v4720 ==> Reset here..
• Reset Canon Pixma MG3500 with Resetter Canon ST v4905 ==> Reset here

Demikian artikel tentang Reset Printer Canon Pixma MG3500 (Waste ink absorber is almost full, Waste ink tank full) semoga bermanfaat untuk kita semua, Jika ada keluhan lain silahkan coret di kolom komentar