How to use General Tool v1.01 (Resetter Printer Canon)

Advertisement

How to use General Tool v1.01 (Resetter Printer Canon)

Steps to use Canon General Tool v1.01:

1. Enter Service Mode on your printer
2. Download General Tool v1.01
3. Select USB Port (1)
4. Select Device ID (2)
5. Set Destination, choose your Canon printer model/type (3)
6. Check EEPROM CLEAR (4)
7. Load paper into your printer
8. Test Pattern 1 (5), wait until the printer finishes printing
9. Test Pattern 2 (6), wait until the printer finishes printing
10. Close General Tool (7)
11. Turn off the printer (wait 10 seconds)
12. Turn on the printer.

Your printer is now ready to use.